User`s manual

Field Selection

You move between fields in Setup using the keys listed below.

Standard Setup Fields

The following is an alphabetical list of Standard Setup fields.

Setup Keys

Key Function

Ð selects next field

Ï selects previous field

{TAB} selects next field on the right or first field of next line

Î selects next value in field

Í selects former value in field

{ESC} returns to main menu

Standard Setup Fields

Field Active keys Selections

Boot Device

Selects the primary boot device.

Possible selections:

• Floppy Disk

• SSD (Solid State Disk)

•HardDisk

• This selects the device from which system

boot is first attempted.

• HardDiskisusedtobootfromHardDiskor

a BIOS Extension device in an SSD socket.

Date {0..9},{↵} Sets the date with the format:

• month / day / year

• You must connect a backup battery, or this

setting will be lost at power down.

Hard disk 1 type

Hard disk 1 table

{0..9} {↵} Selects the first hard disk type.

Selections are:

• Not Installed

• Standard : (drives under 1024 Cylinders)

• Serial: for Virtual Devices mode.

• When using Standard, manually enter param-

eters under Hard Disk 1 Table. LBA param-

eters will be calculated automatically.