User`s manual

24
If You Misconfigure the cpuModule
It is possible you may incorrectly configure the cpuModule using Setup. If this happens, you have
several choices:
If video and keyboard are enabled
:
• Re-boot the cpuModule.
• Immediately press and hold down the {Delete} key until the cpuModule enters Setup.
If video or keyboard are disabled
:
• Insert jumper JP5. This will force the cpuModule to boot using the default configu-
ration, which enables video and keyboard.
• Boot the cpuModule.
• Press the {Delete} key to enter Setup.
If the option <DEL> for Setup is disabled
in the Advanced Setup screen:
• Insert jumper JP5. This will force the cpuModule to boot using the default configu-
ration, which enables the {Delete} key to run Setup.
• Boot the cpuModule.
• Press the {Delete} key to enter Setup.
You can then reconfigure the cpuModule correctly using Setup.