User`s manual

Booting the cpuModule for the First Time

You can now apply power to the cpuModule. Depending on the VGA card you are using, you may

see a greeting message from the VGA BIOS. You will then see:

• the cpuModule BIOS version information

• You may see a message indicating jumper JP5 is installed and the default Setup is be-

ing used

• a message requesting you press {F1} to continue booting using the default Setup, or

press {Delete} to enter the Setup program

If you press {F1}, the cpuModule will try to boot from the Boot Block Flash. Fail Safe Boot ROM

will be assigned the first drive letter available beginning with "C".

If you press {Delete}, the cpuModule will enter Setup. Once you have configured the cpuModule

using Setup, save your changes, turn off power, remove jumper JP5, and reboot.