User`s manual

Connecting the utility cable

The Multifunction connector, CN5, implements the following interfaces:

• AT keyboard

• Speaker output

• System reset input

• Battery input

• Vpp to program 12V Flash SSD devices

To use these interfaces, you must connect to the Multifunction connector, making sure the orienta-

tion of pin 1 is correct. If you are using the Multifunction cable from our cable kit, the cable provides

a small speaker, a 5-pin circular DIN connector for the keyboard, a push-button for resetting the PC/

104 system, and a lithium battery to provide backup power to the Real Time Clock.

To connect individual devices to the Multifunction connector, please see Multifunction Connector,

CN5 on page 39.