User`s manual

17
Connecting Power
Power is normally supplied to the cpuModule through the PC/104 bus, connectors CN1 and CN2 .
If you are placing the cpuModule onto a PC/104 stack that has a power supply, you do not need to
make additional connections to supply power.
If you are using the cpuModule without a PC/104 stack or with a stack that does not include a power
supply, refer to Auxiliary Power, CN3 on page 30 for more details.
WARNING! If you improperly connect power, the module will almost certainly be
damaged or destroyed. Such damage is not warranted! Please verify
connections to the module before applying power.