User manual

Page 94
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l [phone]
SmartRG Inc. Propriety and Condential. All Rights Reserved. Copyright © 2014 smartrg.com
Wireless Bridge
This page allows you to congure wireless bridge features of the wireless LAN interface. You can select Wireless Bridge (also
known as Wireless Distribution System) to disable access point functionality. Selecting Access Point enables access point func-
tionality. Wireless bridge functionality will still be available and wireless stations will be able to associate to the Access Point.
Selecting Disabled in Bridge Restrict will disable wireless bridge restriction. Any wireless bridge will be granted access. Select-
ing Enabled or Enabled(Scan) enables wireless bridge restriction. Only those bridges specied via their MAC address in Remote
Bridges will be granted access.
After selecting Wireless -> Wireless Bridge from the left navigation bar, enter your settings as desired.
Click Refresh to update the remote bridges. Wait for few seconds to update.
Click Apply/Save to commit your changes.