User manual

Page 89
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l [phone]
SmartRG Inc. Propriety and Condential. All Rights Reserved. Copyright © 2014 smartrg.com
Manual Setup
Network Authentication: WPA2
The individual elds on this screen are dened as follows:
Field Name Description
Select SSID Select the SSID from the drop-down list for the wireless network to which this secu-
rity conguration will apply.
WPA2 Preauthentication
Network Re-Auth Interval
WPA Group Rekey Interval [1-65535 seconds] The frequency with which the gateway automatically updates the
group key and sends it to connected LAN client devices.
RADIUS Server IP address Enter the IP address for the Remote Authentication Dial In User Service server as-
sociated with your infrastructure.
RADIUS Port [1-65535] Port 1812 for authentication is a standard for RADIUS authentication per
the IETF RFC 2865. Your RADIUS deployment may differ from this. Older servers may
use port 1645.
RADIUS Key Enter the encryption key required to authenticate to the Radius Server specied via
the Server IP address above.
WPA/WAPI Encryption [AES, TKIP+AES] Choose from Advanced Encryption Standard (AES) or AES com-
bined with Temporary Key Integrity Protocol (TKIP). This eld has been pre-popu-
lated with the option most complimentary to the Network Authentication selected.
WEP Encryption [Enabled, Disabled] Select Enabled to turn on Wired Equivalent Privacy mode.
Encryption Strength [128 bit, 64 bit] Select the length of the encryption method. 128 bit being the more
robust option for security.