User manual

Page 84

501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780

The individual elds on this screen are dened as follows:

Field Name Description

Enable WPS [Enabled, Disabled] Enables Wi-Fi Protected Setup.

Enter STA PIN

Use AP PIN

Select the method [STA PIN, AP PIN] for how the WPS PIN is generated. Select the

desired radio button then click the “Add Enrollee” if necessary to add a specic, en-

rollee station.

If both the PIN eld and Set Authorized Station MAC are left blank, the PBC (push-

button) mode is automatically made active.

Set Authorized Station MAC When manually pairing via WPS, enter the MAC address of the client device you are

trying to connect.

Set WPS AP Mode [Congured, Uncongured] Select Congured to have the gateway assign security

settings to clients. Select Uncongured when you wish to have an external client as-

sign security settings to your SmartRG gateway.

Device PIN (Auto generated by the access point.)

Network Authentication Select the desired network security authentication type.

Note that many of the elds in the Manual Setup portion of the screen vary based on the choice of Network Authentication.

Each variation is presented below.