User manual

Page 66
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l [phone]
SmartRG Inc. Propriety and Condential. All Rights Reserved. Copyright © 2014 smartrg.com
Test Modes
Mode Description
Normal Puts the DSL PHY in test mode, sending only a Normal signal.
Reverb Puts the DSL PHY in test mode, sending only a REVERB signal
Medley Puts the DSL PHY in test mode, sending only a MEDLEY signal.
No Retrain The DSL PHY will attempt to establish a connection as in Normal mode, but once the
connection is up, it will not retrain even if the signal is lost.
L3 Puts the DSL modem in the L3 power state.
Click the Apply button place the gateway in test mode.
CAUTION: Do not modify the tones selected unless under explicit instruction from
a telecommunications professional.
Click the Apply button to commit your changes.