User manual
Page 65
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Condential. All Rights Reserved. Copyright © 2014 smartrg.com
Modulation Data Transmission Rate
G.Dmt ITU-T G.992.1 standard.
Max Downstream: 12 Mbps
Max Upstream: 1.3 Mbps
G.lite ITU-T G.991.2 standard.
Max Downstream: 4 Mbps
Max Upstream: 0.5 Mbps
T1.413 ANSI T1.413 Issue 2 standard.
Max Downstream: 8 Mbps
Max Upstream: 1.0 Mbps
ADSL2 ITU-T G.992.3 standard.
Max Downstream: 12 Mbps
Max Upstream: 1.0 Mbps
AnnexL Annex L of ITU-T G.992.3 standard which supports longer loops but with reduced trans-
mission rates.
ADSL2+ ITU-T G.992.5 standard.
Max Downstream: 28 Mbps
Max Upstream: 1.0 Mbps
AnnexM Annex L of ITU-T G.992.5 standard which supports extended upstream bandwidth.
Max Downstream: 24 Mbps
Max Upstream: 3 Mbps
VDSL2 ITU-T G.993.2 standard.
Max Downstream: 100 Mbps
Max Upstream: 60 Mbps
Parameter 8a 8b 8c 8d 12a 12b 17a
Max DS Tx Power (dBm) +17.5 +20.5 +11.5 +14.5
Max US Tx Power (dBm) +14.5
Min bidirectional net data rate 50Mbps 68Mbps 100Mbps
The individual elds on this screen are dened as follows:
Other Settings
Field Name Description
Inner Pair/Outer Pair The RJ11 connector has four contacts. The center pair of pins is DSL1. The outer pair
pins are the contacts for DSL2. Select which pair should be used.
Bitswap Enable Enables adaptive handshaking functionality
SRA Enable Enables Seamless Rate Adaptation
From the DSL Advanced Settings screen you may select the test mode and apply a tone selection.