User manual

Page 32

501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780

Click Next after completing the necessary elds.

The individual elds on this screen are dened as follows:

Field Name Description

PPP Username: Enter the Username required for authentication to the PPP server.

PPP Password: Enter the Password required for authentication to the PPP server.

PPPoE Service Name: (Optional) Enter a description for this service.

Authentication Method Select a means for authentication from the drop-down list.

[AUTO] Attempt to AUTO detect handshake protocol in list below.

[PAP] Password Authentication Protocol (plaintext passwords)

[CHAP] Challenge Handshake Authentication Protocol. (MD5 hashing scheme on passwords)

[MSCHAP] Microsoft Challenge Handshake Authentication Protocol. (Microsoft encrypted

password authentication protocol)

CP Keepalive Period The frequency with which the keepalive packet is sent by the gateway to the PPP server.

LCP Retry Threshold In the event that the PPP server does not respond to the Keepalive, how many additional at-

tempted packets will the gateway send before giving up and declaring the connection, Failed.

Dial on Demand [1-4320] Enables Inactivity Timeout (minutes). Default = 0 (not applicable.)

Connection automatically starts when there is outbound trac to the Internet. It automati-

cally terminates if the connection is idle based on the value in the Idle Timeout setting.

PPP IP Extension Forward all trac to Advanced DMZ IP specied in the next eld.

Advanced DMZ Only applicable if PPP IP extension is selected. Specify IP to forward trac PPPoE trac to.

Use Static IPv4 Address Specify IPv4 Address to apply to WAN service.

Retry PPP password on

authentication error

[1-65536] Max PPP authentication retries on failure. (65536=Forever)

Enable PPP Debug Mode The system will put more PPP connection information into the system log of the device. This is

for debugging errors and not for normal usage.

Bridge PPPoE Frames Be-

tween WAN and Local Ports

PPPoE passthrough to relay PPPoE connections from behind the modem. Also known as Half-

Bridged mode.

Enable Firewall Enables functions in the Security sub-menu

Enable NAT Enable sharing the WAN interface across multiple devices on the LAN. Also enables the func-

tions in the NAT sub-menu and addition PPPoE NAT features to select.