User manual

Page 111
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l [phone]
SmartRG Inc. Propriety and Condential. All Rights Reserved. Copyright © 2014 smartrg.com
The individual elds on this screen are dened as follows:
Field Name Description
Services [FTP, HTTP, ICMP, SNMP, SSH, TELNET, TFTP]
Species the SCL services that can be enabled or disabled via the Access Control con-
guration screen:
LAN Species service enabled (via checkbox) on LAN side rewall.
Note: ICMP is an always-enabled service by default and has no checkbox.
WAN Species service enabled on the WAN side rewall.
WAN Port Number Species the port the access control applies to on the WAN side for the given service. See
port information below.
Service Control List service: FTP FTP Service access (For WAN this is with default port).
Service Control List service: HTTP HTTP Service access (For WAN this is in association with port specied – default is port 80).
Service Control List service: ICMP ICMP Service access (For WAN this is with default port).
Service Control List service: SNMP SNMP Service access (For WAN this is with default port).
Service Control List service: SSH SSH Service access (For WAN this is in association with port specied – default is port 22).
Service Control List service: TELNET TELNET Service access (For WAN this is with default port).
Service Control List: TFTP TFTP Service (as with default port) Access.