User manual
Page 100
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Condential. All Rights Reserved. Copyright © 2014 smartrg.com
DIAGNOSTICS
Diagnostics
Line performance diagnostic tools are supported by your SmartRG gateway. Three legs of the data path are included in the avail-
able tests: LAN connectivity, DSL connectivity and Internet connectivity tests.
After selecting Diagnostics -> Diagnostics from the left navigation bar, click the Test button at the bottom of the screen.
The table will be updated with fresh diagnostic information regarding connection integrity. There is signicant in-line documenta-
tion regarding each individual test. Simply click the Help link at the far right of each line item to learn more about what is being
tested and what actions to take in the event that a particular test should fail.
The normal test method is initiated with the Test button and utilizes OAM F5 loopback cells.
Selecting the Test With OAM F4 will conduct the test at the VP level in lieu of at an individual VC connection.