User guide

Real Time Automation, Inc. 3 1-800-249-1612
460 Gateway Device Line 460MXE
Port Connections (BACnet/IP / Modbus and Ethernet/IP / Modbus)
The factory default port settings on the 460MXE gateway are for Port 0 (T-strip) to be set for RS485 in-
cluding power (Pin 5). Port 1 (DB9) is set to RS232 by default.
If these default port are not compatible with your equipment they can be configured differently. For spe-
cific jumper settings refer to the end of this manual, appendix A. For assistance changing port configura-
tions contact our customer support department.