User guide

Real Time Automation, Inc. 10 1-800-249-1612
460 Gateway Device Line 460MXE
3) Selecting any of the first four devices will install the device with preset Data In settings. The device Slave
address and Data Out parameters will still need to be configured.
4) To add a generic Modbus slave device click on the Add Generic Remote Modbus Slave Device button.
5) Enter a name for the device in the Device Label field to help distinguish between multiple devices.
6) In the Slave address enter the address that corresponds to your Modbus Slave Device.
7) If you need to change the read order for values that are 4 bytes check the box labeled Swap Words.
1st reg. = 0x2000
2nd reg. = 0x4397
1st reg. = 0x4397
2nd reg. = 0x2000
Example:
With the value 302.25 mapped as a floating value.
When Swap Words is enabled When Swap Words is not enabled