User guide

Allen-Bradley PLC Configuration
Click the Allen-Bradley PLC button to access the configuration page.
1) Delay Between Messages: Enter the length of time to delay between read and write scan line
requests (ms).
2) Response Timeout: Enter the amount of time the gateway should wait before a timeout is
issued for a read/write request (ms).
3) Delay Between Connect Attempts: Enter the amount of time the gateway should wait between
attempts to connect to the PLC.
4) Dependency Protocol: If enabled, the Allen-Bradley PLC communication will stop if
communication to the selected protocol is lost.
Real Time Automation, Inc. 13 1-800-249-1612