User manual

Default IP Address – 192.168.0.100
Specifications
Table 1-1 shows the specifications for the 460 Gateway.
Table 1-1 460 Gateway specifications
Item Description
Hardware description Dimensions: 11 x 8.3 x 2.54 centimeters (4.2 x 3.25 x
1 inches)
Weight: 5 ounces
Enclosure material: anodized AL
Mounting: DIN rail
Power connector: 2 pin barrel
Power requirements 12VDC at 500ma
Temperature range 0° to 70° Celsius (32° to 158° Fahrenheit)
Ports
Refer to your 460 Quick Start
Guide for correct port
configuration. (Available ones
depend on the 460
configuration you purchased.)
RJ45 10/100 Base-T (Ethernet)
For gateways with two DB-9 connectors
• RS232 on ports 0 and 1
• RS485 on port 0
For gateways with one DB-9 connector and one T-
Strip5 connector
• DB-9 can be RS232, RS485, or
CAN/DeviceNet
• T-Strip5 can be RS-232, RS485, or
CAN/DeviceNet
*Both ports can NOT be configured to use the same
transceiver (RS-232, RS-485, or CAN).
LEDs Connection (link speed) and power
Some models have an additional two LEDs on the
long side of the Gateway unit that are for future use.
Supported baud rates 300 to 115.2K
Internal logic specification IEC 61131 (CoDeSys™)
Logic types supported Ladder Logic, Instruction List, Function Block
Programming, Structured Text, and Sequential
Function Chart
460 Gateway User Manual Page 2