User manual

Default IP Address – 192.168.0.100

4. Launch the web browser. In the address window, enter

http://192.168.0.100

Press Enter

The Real Time Automation 460 Gateway web page displays. See Figure 4-11.

Note: If the web page does not display, check the following settings:

The web page does not display when the computer is on a wireless network because

of subnet selections. Use either the crossover cable or a hub/switch on the same

subnet.

Verify that your web browser is not set for a proxy server. If you are using Internet

Explorer, check Internet Options/Connections/LAN Settings. Make sure the check

box is checked for

Automatically detect settings and the check box is empty (not

checked) next to the

Use a proxy server for your LAN option.

Figure 4-11 Real Time Automation 460 Gateway Main Page

5. Go to the

Network Settings area of the screen. Click on

The Network Setup screen displays. See Figure 4-12.

460 Gateway User Manual Page 68