User manual

Default IP Address – 192.168.0.100
Figure 2-68 RTA 460 Utilities screen
2. Click on toward the top of the screen.
A prompt displays asking you to verify that you want to restart the 460 Gateway.
Restar
3. Click OK.
Another prompt displays giving you the approximate time to complete the restart.
4. Click OK.
When the restart is complete, the 460 Gateway Main Page displays if your computer is on
the same subnet (or attached) to the 460 Gateway.
If your computer is not on the same subnet, the screen does not change, as you are no
longer receiving signals from the 460 Gateway.
5. If you are installing the 460 Gateway in a position that is not connected to the computer
that did the software setup, disconnect the crossover cable from the 460 Gateway and
from the computer.
Save the crossover cable with the null modem cable and the CD that was shipped with the
460 Gateway in case you need to make changes at a later time.
460 Gateway User Manual Page 53