User manual
Default IP Address – 192.168.0.100
Figure 2-32 External Device Configuration screen
7. To enable a Device Buffer, click on the Add Remote Ethernet/IP Server button.
8. Click Edit in the Action column.
9. Enter the Device Address. Select the data types (RegType) from the drop-down menus
for the registers. Enter the registers and program tags for each data type in this Device
Buffer.
10. Select Save. The Master and Client Module External Device List re-displays with the
information entered for that Device Buffer. To add another Device Buffer, click on the
Add Remote Ethernet/IP Server button and then edit that buffer’s settings.
11. When you have finished enabling Device Buffers for the EtherNet/IP Client, click on .
The RTA 460 Gateway Main Page displays.
Main
EtherNet/IPServerconfiguration
If your version of the 460 Gateway requires your gateway to act as an EtherNet/IP Server, use
the following steps to configure the gateway. At least two Communication Modules must be
configured.
460 Gateway User Manual Page 27