User manual
Default IP Address – 192.168.0.100
ModbusTCPClientconfiguration
If your version of the 460 Gateway requires your gateway to act as a Modbus TCP Client, use
the following steps to configure the gateway. At least two Communication Modules must be
configured.
1. Click on next to the Selected Communication Modules on the RTA 460 Gateway
Main Page. See Figure 2-2.
The Communication Module Configuration screen displays. See Figure 2-18.
Edit
Note: The Edit buttons are grayed out when the task applies to a different 460
Gateway version than you purchased. Please contact Real Time
Automation, Inc. (RTA) at 262.439.4999 or www.rtaautomation.com for more
information about 460 Gateway configurations.
Figure 2-18 Communication Module Configuration screen
2. Click on next to
Modbus TCP Client.
The Enabled? prompt displays. See Figure 2-19.
Edit
460 Gateway User Manual Page 17