User manual

Default IP Address – 192.168.0.100
2. Insert the power connector to the 460 gateway unit, and then plug the power cord into a
power source.
3. Launch the web browser. In the address window, enter
http://192.168.0.100
Press Enter
The RTA 460 Gateway Main Page displays. See Figure 2-2.
For illustration purposes, this manual refers to example screens from the 460EDX Gateway.
Other 460 Gateway versions have similar screens.
Note: If the web page does not display, check the following settings:
The web page does not display when the computer is on a wireless network because
of subnet selections. Use either the crossover cable or a hub/switch on the same
subnet.
Verify that your web browser is not set for a proxy server. If you are using Internet
Explorer, check Internet Options/Connections/LAN Settings. Make sure the check
box is checked for Automatically detect settings and the check box is empty (not
checked) next to the Use a proxy server for your LAN option.
Figure 2-2 460 Gateway Main Page
460 Gateway User Manual Page 6