User manual

En
19
1. Time Setting
Use this menu to set the system time.
Press the ▲▼ buttons to select the Time Settings and press the OK button to enter the Time Setting menu.
2. A/V Output Settings
Press the ▲▼ buttons to select the A/V Output Settings and press the OK button to enter the A/V Output Settings
menu.
Use this menu to congure the audio and video outputs. The menu includes the items Video Output resolution,
Screen Format, SPDIF and SCART mode. Adjust these settings to be compatible with your TV display and any
other equipment you may have connected to your receiver.
Video Output: To set the video resolution to 576i, 576p, 720p and 1080i. (SCART and RCA outputs do not support
higher resolution than 576i; you can also press the V-FORMAT button on the RCU to switch between different
resolutions).
Screen Format: Set the aspect ratio to 16:9 (typically for Flat Panel TVs), 4:3 (typically for CRT TVs) or Auto.
S/PDIF output: To output RAW (AC-3 bit stream output) or PCM (stereo bit stream out) over the SPDIF output.
SCART Mode : To output CVBS or RGB video signal over the SCART output.