ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE ENSAMBLE Height: 32,44 in Width: 19,48 in Depth: 17,71 in LOT N° Alto: 82,4 cm Ancho: 49,5 cm Fondo: 45 cm 2 PEOPLE ASSEMBLY RECOMMENDED REF./SKU. SL-FILEC-2 For assistance with assembly or customer service, call 1-877-924-2090 (English) Monday-Friday, 8 a.m. to 5 p.m. Mountain Time, North America. Email: customerservice@rstbrands.com or visit our website at www.rstbrands.
! IMPORTANT RECOMMENDATIONS / RECOMENDACIONES IMPORTANTES -The cabinet MUST be used exclusively indoors, do not expose to direct sun. / El mueble debe ser usado únicamente en interiores, no exponer al sol directo. -Do NOT overload the cabinet (see suggested loads), Do not hit or hammer the cabinet (just when indicated). / NO sobrecargar el mueble (ver las cargas sugeridas). No golpear ni martillar el mueble (solo cuando se indique). -Do not drag, lift and move between two people.
INDEX Assembly Hardware ÍNDICE Herrajes para Armado 4 4 Assembly Parts 5 Piezas de Armado 5 Suggested Loads 6 Cargas Sugeridas 6 Assembly Recommendations 6 Recomendaciones de Ensamble 6 Assembly Steps Warranty 7-18 Pasos de Armado 19 REQUIRED TOOLS* HERRAMIENTAS NECESARIAS* Garantía 7-18 19 SUGGESTED TOOLS* HERRAMIENTAS SUGERIDAS* Drill / electric screwdriver Taladro/ destornillador eléctrico *Not included, and not shown actual size.
ASSEMBLY HARDWARE HERRAJES PARA ARMADO Please check that the hardware content is correct. If any item is missing, please call to our customer service line. Compruebe que el contenido de los herrajes sea el correcto. En caso de que falte alguna pieza, por favor llame a nuestra línea de atención al cliente.
ASSEMBLY PARTS PIEZAS DE ARMADO D L E B G H F C K I G H K J L I A A - x1 B - x1 C - x1 D - x1 E - x1 Page 5 F - x1 G - x2 H - x2 I - x2 J - x1 K - x2 L - x2
MAX SUGGESTED LOADS CARGAS MÁXIMAS SUGERIDAS 17 lbs. 8 Kg. 17 lbs. 8 Kg. 17 lbs. 8 Kg. ASSEMBLY RECOMMENDATIONS RECOMENDACIONES DE ENSAMBLE Two people are recommended to assemble the product. Ensamble el mueble entre dos personas. Assemble the cabinet on a flat, smooth surface, preferably on a carpeted floor or the carton box of the product.
1 A 2 Rotate Voltear A Page 7
3 Slide in the shown order. Deslice en el orden indicado.
5 C 6 B Page 9
7 A B 8 2 1 A C Page 10 B
9 E Rotate Voltear 10 E C 2 1 Page 11 A B
11 D 12 D 2 1 E B C A Page 12
D L B L 14 Hx2 Page 13
15 Ix2 16 x2 G H I Page 14
17 x2 G Slide the back panels inside the drawer Deslice los fondos dentro del cajón H I K 18 F Page 15
19 G H K I F 2 1 20 J Page 16
21 G H K I J 2 1 22 x2 K H F/J Page 17 G
23 D E B G L F K I G J C K A I Slide the drawers inside the cabinet. Deslice los cajones dentro del mueble. After you finish the adjustment of the cams, cover them with the cover caps. Después de ajustar todas las cajas minifix, cúbralas con las tapas adhesivas. Page 18 A After you finish assembling the cabinet, take off the adhesive letters. Al terminar de armar, desprenda las letras adhesivas.
WARRANTY POLICY PÓLIZA DE GARANTÍA Welcome to the RST Family Here at RST Brands™ we are committed to your satisfaction by offering you a competitive warranty to ensure all our products are free from defects, in material and workmanship, to the original purchaser for a period of one year from the date of your purchase. How It Works We are happy to furnish a replacement at no cost to you in the case we determine a component to be defective.
