User`s guide

Introduction

* This software has been found to work on typical computers that meet the above

requirements, but we do not guarantee that it will operate on all such computers.

Please be aware that differences in design or conditions of use may produce

differences in the processing power of otherwise similar computers.

* You can connect the M-400 to a USB connector that supports USB 2.0. However, even

when connected to a USB 2.0 connector, it will operate only as a USB 1.0/1.1 device.

This will not affect the performance of the M-400 console itself.

Copy the “M-400 RCS” folder to the drive of your computer.

Delete the “M-400 RCS” folder that you copied to the drive of your computer.

In order for M-400 RCS to remotely control the M-400 console, the M-400 Driver (for

Windows or Mac) must be installed in your computer.

Download the most recent version of the driver from the following website. For

details on installing the M-400 Driver, refer to the document (HTML file) included

with the driver.

http://www.rolandsystemsgroup.net/

Operating requirements

Supported OS Windows XP Home Edition/Professional

Windows Vista

Windows 7

* M-480 RCS does not work with Windows XP Media Center Edition.

Mac OS X 10.5.8 or later

Supported

computers

A computer that provides a USB connector complying with USB

Specification Revision 1.0 or later USB

CPU Windows: Pentium/Celeron or compatible processor, 1.6 GHz or

faster

* We cannot make guarantees regarding the compatibility of pro-

cessors.

Mac: Intel Processor

Memory Windows: 512 MB or more

Mac: 1 GB or more

Screen resolution

and color depth

1024 x 768 pixels or higher, 65,536 colors (16-bit color) or higher

Installing M-400 RCS

Uninstalling M-400 RCS

About the M-400 Driver