User`s guide

31
Online mode
fig.OnlineEdit.eps
Online mode lets you remotely control the M-400 console from M-400 RCS. Level
meter data from the M-400 console and operations performed on the M-400 console
are also sent to M-400 RCS.
In online mode, the following operations are synchronized between M-400 RCS and
the M-400 console.
• Mixer parameter operations
• Scene memory recall and store operations
• Scene list editing
• Library recall operations
The following operations are not synchronized.
• Switching between screens
• Storing or renaming user library items
• Selection of scene numbers using the [PREV] [NEXT] buttons, etc.
1
Start up the M-400 console, and use a USB cable to connect it to your
computer.
fig.USBConnection.eps
Operation in online mode
Synchronization in online mode
Work flow in online mode
Control the M-400
Operations on the M-400 are fed back
If you’ve cleared the “Level
Meter” check box in the
preference settings, level
meter data will not be sent
from the M-400 console.
(Preference settings (p. 24))
USB cable
To USB Port
To the rear panel
USB connector