User`s guide

30
Offline mode
4
Edit the project.
If necessary, use the “Reac Config” dialog box to make REAC input/output
configuration settings.
5
Save the project file, either by overwriting the existing file or under
a different name.
fig.OfflineEditStep3.eps
6
Exit M-400 RCS.
7
On the M-400 console, load the project file from USB memory.
fig.OfflineEditStep4.eps
USB memory
Save the project file
If you’re saving a project file
that you wish to load into the
M-400 console, save it in the
“\RSS\M-400\PROJ” folder of
your USB memory.
USB memory
Load the project file
When a project file saved by M-400 RCS is loaded by the M-400 console, the
following settings will not be loaded.
• Settings of the SYSTEM screen (INTERNAL SAMPLING FREQ, BRIGHTNESS, FADER
TOUCH SENSE)
• REAC SETUP settings of the REAC CONFIG popup
• Settings of the REMOTE popup
• USER settings