User`s guide

28
Using M-400 RCS
You can manage and make settings for the M-48 Live Personal Mixer in the same way
you do from the M-400 console.
M-400 RCS cannot use the following functionality.
• Accessing and operating the M-48 LOAD/SAVE popup
• Monitoring the source in the M-48 SOURCE LEVEL/PAN popup
• Updating the M-48 system program
In offline mode, the M-48 list in the M-48 MANAGER popup will show a unit
named “Virtual.”
fig.ScrM48Virtual.eps
Settings you make for the “Virtual” unit can be stored in the M-48 library. Settings
from the M-48 library can be applied to a physical M-48 in the following ways.
● A project file saved by M-400 RCS can be loaded into the M-400
console.
In the SYSTEM screen's LOAD/SAVE popup, select the M-48 LIBRARY check box to
load it.
"Saving a project" (p. 17)
● Switch M-400 RCS to online mode.
The M-48 library data in M-400 RCS can be recalled to a physical M-48 unit.
"Switching to online mode" (p. 18)
You cannot perform the following operations for the “Virtual” unit.
• Edit the unit name “Virtual”
• Store or recall memories
• Set the MEMORY SAFE function, or make output mute settings
The M-48 MANAGER popup will show the M-48 units that are actually connected.
You can edit and manage each M-48 unit using the same operations you do from the
M-400 console.
M-48 settings
Making M-48 settings in offline mode
M-48 settings in online mode
For details on the M-48 Live
Personal Mixer, refer to the
“M-48 Owner's Manual.”
For details on M-48 settings,
refer to the M-400 owner's
manual (version 2.00 or later).
Settings made for the
“Virtual” unit will be
discarded when you switch
to online mode. Before
switching to online mode,
you must save these settings
to the M-48 library and then
save the project.
Even if you switch to online
mode, the M-48 library of M-
400 RCS and the M-400
console will remain
unaffected.
For details on M-48 settings,
refer to the M-400 owner's
manual (version 2.00 or later).