User`s guide

26
Using M-400 RCS
1
From the “Setup” menu, choose “LCR Setup...”
fig.ScrLCRSetup.eps
The “LCR Setup” dialog box will appear.
2
Use the LCR SYSTEM check box to turn LCR System on/off.
If this check box is selected, LCR System will be on. If it is cleared, LCR System will
be off.
3
If you've selected the LCR SYSTEM check box, use the MAIN C
selection box to select the AUX that will be used as MAIN C.
4
Click “OK.”
A message box will appear, asking you to confirm the operation.
● If the LCR SYSTEM check box is selected
fig.ScrLCRSetup_conf1_e.eps
● If the LCR SYSTEM check box is cleared
fig.ScrLCRSetup_conf2_e.eps
5
Click “OK.”
The item shown in the message box of step 4 will be initialized, and the LCR
system setting will be changed.
LCR System settings
For more information about
the LCR features, refer to the
M-400 owner's manual
(version 2.00 or later).