User`s guide

25
Using M-400 RCS
screen.
● Fader Layer
This chooses the fader layer buttons (p. 12).
● Main Fader
If you select “SENDS ON FADER MASTER”, the MAIN fader module becomes the
send-destination AUX fader, while the SENDS ON FADER mode is on.
● DCA [SEL]
This selects the operation that pressing [SEL] preforms when DCA 1 through 8
has been called up to the fader module section. The selection items are as
indicated below.
CHANNEL DISPLAY The CHANNEL DISPLAY screen will be used as the home
screen.
METER The METER screen will be used as the home screen.
[CH1-24] [CH25-48] [AUX/DCA] CH1-24, CH25-48. AUX/DCA buttons
[CH1-24] [CH25-48] [AUX/MTX] CH1-24, CH25-48, AUX/MTX buttons
OFF [SEL] is disabled.
ASSIGN Access the DCA GROUP ASSIGN popup.
T
he home screen is what
appears when you click the
button of the currently
displayed screen (the button
shown in blue).