User`s guide

Using M-400 RCS

Here’s how to make preference settings within M-400 RCS. The settings you make

here will not be reflected in the M-400 console.

Windows: From the “Setup” menu, choose “Preferences...”.

Mac: From the “M-400 RCS” menu, choose “Preferences...”.

fig.ScrPref.eps

The “Preferences” dialog box will appear.

Select the desired items in the “Preferences” dialog box.

● Level Meter

If you select this, level meter data will be received in online mode.

● Confirmation

These enable/disable various confirmation messages that appear in the basic

screen area. A particular type of confirmation message can be enabled by

selecting the corresponding check box.

● Ch Select

These items specify what will happen when you select a channel. The items you

select will be enabled.

● Home Screen

This chooses the home screen. The screen you select here will be the home

Preference settings

Scene/Library Store Confirmation messages when storing a scene or library

Scene/Library Recall Confirmation messages when recalling a scene or library

Patchbay Change Confirmation messages when changing the input/output

patchbay settings

Channel SELECT follows SOLO but-

ton

When you press [SOLO], that channel will be se-

lected.

Channel SELECT changes with Lay-

er Selection

When you select a fader layer, the most recently

selected channel of that layer will be selected.

CHANNEL DISPLAY follows CH SE-

LECT button

Pressing [SEL] will make the CHANNEL DISPLAY

screen appear.

If the processing load of M-

400 RCS is too great in online

mode, you can lighten it by

clearing the Level Meter

check box.