User`s guide

18
Using M-400 RCS
1
Click the ONLINE button.
fig.ScrOffline.eps
fig.ScrSync1.eps
The “Synchronize” dialog box will appear.
2
In the “Project” field, specify the project to which you will
synchronize: the project on the M-400 console or the project in M-
400 RCS.
3
If you selected “Send to CONSOLE” in step 2, use the “Option (Send
to CONSOLE)” field to specify whether you want to send the user
library.
If you select the “Send User Libraries” option, the user library will be sent from M-
400 RCS to the M-400 console.
4
Click “OK.”
If you selected “Read from CONSOLE” in step 2, the current project will be closed,
a new project will be opened, and then synchronization will begin.
A message box will ask whether you want to save the current project.
fig.ScrSyncConfirm.eps
• If you click “Yes,” the current project will be saved (by overwriting).
• If you click “No,” the current project will not be saved.
• If you click “Cancel,” project synchronization will be cancelled.
Switching between modes
Switching to online mode
Read from CONSOLE The project will be loaded from the M-400 console into M-400
RCS.
Send to CONSOLE The project will be sent from M-400 RCS to the M-400 console.
M-400 RCS will be in offline
mode when you start up or
when you open a project file.
Before you continue, start up
the M-400 console, and use a
USB cable to connect it to
your computer.
“Send User Libraries” will
overwrite current libraries
unless they are locked. Be
sure to lock or save any
needed M-400 libraries to
USB memory prior to
sending.