3.
Welcome Congratulations on purchasing this Sound Bar. This product will improve and amplify the sound from your TV or MP3 player. Please read the warning section on pages 18 & 20 carefully before using your Sound Bar. You should have Sound Bar Remote control (AAA batteries x 2) Power cable Wireless Subwoofer HDMI cable Optical cable 3.5-3.5mm audio cable Wall mount kit Need something else? There are a wide range of accessories and other products that can be ordered direct to your door.
Contents You should have 02 Your Sound Bar 04 Wireless Subwoofer 05 Prepare the Remote Control 05 Recognis the remote control buttons 06 Position your Sound Bar 07 Fitting the wall brackets 08 Mounting the Sound Bar 08 Connecting your Sound Bar 09 Basic Operation 12 AUX / OPTICAL / HDMI Operation 13 Bluetooth® Operation 14 USB Operation 15 Troubleshooting 16 Technical specification 17 Warnings 18 3
Your Sound Bar 12 3 6 7 8 9 10 11 1 Remote Control Sensor Receive signal from the remote control. 2 Display Window Show the current status. 3 (ON/OFF) button Switch on/off. 4 / (VOL) buttons Increase/decrease the volume level. 5 (SOURCE) button Select the play function. 6 AC~ Socket Use to connect to power cable. 7 AUX Socket Connect to an external audio device. 4 2 1 3 4 5 8 HDMI OUT TV (eARC/ARC) Socket The port for connecting a TV.
Wireless Subwoofer 1 AC~ Socket Connect to power. 2 PAIR button Press activate the pairing function between the main unit and the subwoofer. 1 3 Subwoofer's PAIR Indicator Light stops blinking once the subwoofer is paired with the Sound Bar. 2 3 Prepare the Remote Control IMPORTANT: The remote control will work within a 6m range, however this may be impossible if there are obstacles between the unit and the control.
• Remove the battery from the remote control when not in use for a long period of time, as corrosion or battery leakage may occur and result in physical injury, and/or property damage, and/or fire. • • • Do not use any batteries other than those specified. Do not mix new batteries with old ones. Never recharge a battery unless it is confirmed to be a rechargeable type. Recognis the remote control buttons 1 2 3 : Switch the unit between ON and STANDBY mode. : Select the play function.
Position your Sound Bar The correct position of the Sound Bar Placed on a stand: If your TV is placed on a table, you can place the unit on the table directly in front of the TV stand, centered with the TV screen. Wall mounted: If your TV is attached to a wall, you can mount the unit on the wall directly below the TV screen. A B How to mount your Sound Bar on a wall IMPORTANT: Before installing your Sound Bar please read the information below.
Fitting the wall brackets 1. Drill 2 parallel holes (Ø 5.5-6 mm each according to wall type) in the wall. The distance between the holes should be 905 mm (35.6”). 2. Insert the supplied wall anchors into 2 screw holes on the wall. Insert the supplied wall bracket screws through the wall brackets into the wall anchors. Fix and tighten the screws on the wall. 905 mm (35.6”) 1 2 4 3 Mounting the Sound Bar 3. Remove the screws at the back of the unit.
Connecting your Sound Bar Dolby Atmos® Dolby Atmos gives you immersive listening experience by delivering sound in three dimensional space, and all the richness, clarity, and power of Dolby sound. For more information, please visit dolby.com/technologies/dolby-atmos For using Dolby Atmos® ® Some 4K HDR TVs require the HDMI input or picture settings to be set for HDR content reception. For further setup details on HDR display, please refer to the instruction manual of your TV.
HDMI IN 1 HDMI IN 2 . . . HDMI OUT Method 2: Standard HDMI - If your TV is not HDMI ARCcompliant, connect your Sound Bar to the TV through a standard HDMI connection. HDMI IN Use the OPTICAL Socket - HDMI OUT TV (eARC/ARC) cable to connect Use an OPTICAL the Sound Bar's OPTICAL socket HDMI IN and the TV’s OPTICAL OUT socket. HDMI OUT TV (eARC/ARC) OPTICAL HDMI INOPTICAL 1 HDMI IN 2 . . . Tips: • Your TV must support the HDMICEC and ARC function. HDMICEC and ARC must be set to On.
HDMI eARC/ARC HDMI OUT TV (eARC/ARC) Connect Power Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. Before connecting the AC power cord, ensure you have completed all other connections. OPTICAL OPTICAL Soundbar Connect the mains cable to the AC~ B socket of the Sound Bar and then into a mains Asocket. Headphone Subwoofer AUX Connect the mains cable to the AC~ socket of the subwoofer and then into a mains socket.
Basic Operation Standby/ON When you first connect the main unit to the mains socket, the main unit will be in Standby mode. Press the button on the unit or on the remote control to switch the unit ON. Press the button again to switch the unit back to STANDBY mode. Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely. Auto Wake If a TV or an external device is connected, the unit will switch on automatically when the TV or the external device is switched on.
Tip: If no button is pressed within 5 seconds, the system will automatically exit the menu. Display ( ) Description ( , ) Adjust the bass level. (bass +3 ~ bass -3) Adjust the treble level. (treble +3 ~ treble -3) Set the audio delay. (AV 00 ~ AV 200) Set display brightness. (DIM 03, DIM 02, DIM 01) Auto turn off display. (ON / OFF) BASS: Adjust the bass level. TREBLE: Adjust the treble level. AV SYNC: Video image processing, sometimes longer than the time required to process the audio signal.
• • The full Dolby Atmos experience is only available when the Sound Bar is connected to the source via a HDMI 2.0 cable. The Sound Bar will still function when connected via other methods (such as a Digital Optical cable) but these are unable to support all of the Dolby features. Given this, our recommendation is to connect via HDMI, in order to ensure full Dolby support. Bluetooth® Operation Pairing the unit with a Bluetooth® device to listen to music: First time pairing 1.
• The player will also be disconnected when your device is moved beyond the operational range. USB Operation 1. Slot the USB device into the USB slot in the back of the Sound Bar. 2. Press the (SOURCE) button repeatedly to select the USB mode. During playback: • To increase/decrease the volume, press / button. • To pause or resume play: press the /OK button on the remote control. • To skip to the previous/next file: press the / buttons on the remote control.
Troubleshooting To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service. No power • Ensure that the AC cord of the apparatus is properly connected . • Ensure that there is power at the AC outlet. • Press (standby) button to turn the unit on. Remote control does not work • Before you press any playback control button, first select the correct source.
Warnings This product was designed and manufactured to meet strict quality and safety standards. There are, however, some operation precautions that you should be aware of: CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
15 16 17 18 19 20 21 This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. Minimum distance around the apparatus for sufficient ventilation is 5cm.
Battery usage CAUTION To prevent battery leakage which may result in bodily injury, property damage, or damage to the apparatus: - Install all batteries correctly, + and as marked on the apparatus. - Do not mix old and new batteries. - Do not mix alkaline, standard (Carbon-Zinc) or rechargeable (NiCd, Ni- MH, etc.) batteries. - Remove batteries when the unit is not used for a long time. Correct Disposal of this product.
EN FCC Statement : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
FR Déclaration de la FCC : Cet appareil est conforme à la partie 15 du règlement de la FCC. Le fonctionnement est sujet aux deux conditions suivantes : 1) Cet appareil ne doit pas provoquer de brouillage préjudiciable et (2) cet appareil doit accepter tout brouillage reçu, y compris le brouillage susceptible de provoquer un fonctionnement indésirable.
Questions? Need some help? This manual will help you enjoy your new product. If you still have questions, call our help line: 1-888-516-2630 0333 600 7700 This on the product or in the instructions means that your electrical and electronic equipment should © 2021 Walmart onn. is symbol a trademark of Walmart All Rights Reserved. be disposed at the end ofAR its 72716 life separately from your household waste. Distributed by Walmart Inc.
