User`s manual

Description

Front Panel

1. POWER: Press POWER button to power the NEO K-2 on or off.

2. KEY (b/#): Use these buttons to adjust the b/# key of music

3. PREVIOUS/ NEXT: Use these buttons to skip to the next or previous track

4. PLAY/PAUSE: Press this button to play or pause the current track or song.

5. STOP: Press this button to stop playback

6. MPX(=MULTIPLEX): Press this button to turn on/off the vocal channel.

7. INPUT(DISC/USB/CARD): Press this button to select the source drive between Disc/USB and Card Reader

8. NUMERIC(0~9): Press Numeric(0~9) buttons to select the track or song number directly.

9. PLAYER-A(=SWITCH TO PLAYER-A): This button select PLAYER-A to send out through the mixed A/V

OUTPUT on the rear panel.

10. USB HOST: Insert USB flash drives or external USB Devices (FAT or FAT32 file system only)

11. 3-IN-1 CARD READER: Insert SD Cards here(FAT or FAT32 file system only)

12. PLAYER-B(=SWITCH TO PLAYER-B): This button select PLAYER-B to send out through the mixed A/V

OUTPUT on the rear panel

13. MIC INPUT FOR PLAYER-A: Connect Microphone to here to sing with PLAYER-A only.

14. MIC VOLUME FOR PLAYER-A: Control the Microphone volume of PLAYER-A only.

15. OPEN/CLOSE: Press this button to open/close the Loader Tray

16. CANCEL: Press this button to cancel the wrong number input

17. PROGRAM: Press this button after select Track or Song Number to program.

18. IR RECEIVER: Receives signals from the remote control.

19. LOADER TRAY: Insert a disc here

20. LED DISPLAY: Displays graphical information of disc/song time and nuber…etc.