RSI 18 Inch Louver Wall Mounted Window RSI-WV Install Instructions www. RSIWW.com customerservice@rsiww.
Locate location between Greenhouse or wall supports to place the RSI- Wall Vent. Mark Back of Shutter 18.25 inches square opening to be cut out for RSI – Wall Vent Placement. www. RSIWW.com customerservice@rsiww.
Remove RSI- Wall Vent to expose corner marks of where the Wall Vent will go. Cut opening with Razor knife or hack saw. Make sure to cut all the way through. www. RSIWW.com customerservice@rsiww.
18.25” square finished cut out. Hold RSI – Wall Vent in place and drill mounting holes. The frame should be facing the inside of the greenhouse and the vent with louvers should be facing the outside of the greenhouse or structure. www. RSIWW.com customerservice@rsiww.
Install quarter inch bolts and washers. (INSIDE). Finished installed bolts and washers (OUTSIDE WILL HAVE NUTS THAT THE BOLTS ARE ATTACHED TO). www. RSIWW.com customerservice@rsiww.
Install AUTOMATIC Opener to opener arm on Wall Vent (INSIDE). Install Opener Linkage to frame of wall vent (INSIDE). www. RSIWW.com customerservice@rsiww.
Install Complete. Thank you for your business. www. RSIWW.com customerservice@rsiww.