Installation Manual
22
INSTALLATION MANUAL
4. FEA
TURES GUIDE
XTO-IP Alarm panel
4.8 Golden rules
1
Area 1 is always delayed.When you register a keypad or a badge
reader into an area, that area will automatically be delayed.
2
Never position a panel next to a high voltage electrical cabinet .
3
Press CLR to erase a typing mistake.
4
Never register the same device twice (delete from the system first).
5
Registration of up to 25 devices (including the keypad).
6
Respect indoor infrared devices installation height (2m10 to 2m30).
7
Outdoor cameras have to be installed at 2m60 to 3 meters
height. Those devices needs to to protect an access and not a zone.
8
Do not fix the keypad at the beginning of the installation as it will
need to be portable during programming.
Always clean the lens of the cameras aer the installation
(Use a clean, dry cloth, taking care not to exert pressure on
the lens).
9
10
To switch between UPPER and lower case, use the M/m
key from the CMA keypad or hold a digit key (0 to 9) for
XMA/XMB.
11
Internal components are fragile, be careful opening or
closing the panel.
LCD screen goes dark aer 30 seconds of inactivity, press an
arrow or numeric key to light it up.
13
Use only batteries provided by Videofied (siren : Alkaline
batteries).
14
Infrared detectors should never be installed in stairs or close
to stairs (false alarm risks).
15
A colon display [:] means that the parameter can be
changed.
12