User Manual

7
XTO-IP Alarm panel
INSTALLATION MANUAL
2.1 Standalone mode
2.2 XTENDER mode
In this functioning mode, the XTO
panel works as a standard hybrid
alarm system with 25 wireless
peripherals and 3 programmable
inputs.
It is a fully standalone alarm
system.
Arming O/P 1
Arming O/P 2
Existing Host
panel
The XTO-iP panel can be used as standard standalone alarm system but it can also be connected to an existing alarm system
capable of latching a 9-12Vcc* voltage used for its arming/disarming.
When the XTO-iP panel is used in XTENDER mode, the system will only be able to arm and disarm by latching 9-12Vcc to
its arming inputs Arming Input 1 and/or Arming Input 2.
When the voltage switches to 0V, the panel will disarm automatically.
On a programed panel, you can choose between standalone and XTENDER modes from the menu :
CONFIGURATION (LVL 4) > GENERAL PARAMETERS > XTENDER
*When using an XTO in XTENDER
mode, the panel has to be powered
by the mains power supply.
2. XTENDER MODE