User Manual

22
INSTALLATION MANUAL
4. XTO-IP FEATURES GUIDE
XTO-IP Alarm panel
Prog. Out. COM
Prog. Output2
Prog. Output1
Ref GND
Prog. Input3
Prog. Input2
Prog. Input1
Ref+
Ref GND
Arming Input2
Arming Input1
Ref+
PWR AC2/DC-
PWR AC1/DC+
Prog. Out. COM
Prog. Output2
Prog. Output1
Ref GND
Prog. Input3
Prog. Input2
Prog. Input1
Ref+
Ref GND
Arming Input2
Arming Input1
Ref+
PWR AC2/DC-
PWR AC1/DC+
IMPORTANT :
Ces sorties ne peuvent
connectées qu’à des circuits
Très Basses Tension de
Sécurité (TBTS) soit au
maximum 30VAC ou 60VDC.
4.8 Programmable inputs and outputs
The XTO control panel has 3 programmable inputs and 2 programmable outputs. Please note that we advise to connect the
panels to a power supply when using programmable inputs. These functions allow the linking of Videofied
®
security systems to
auxiliary equipment such as panic buttons, pepper spray, smoke generator, hard-wired door contact, light curtain, etc.
PROGRAMMABLE INPUT 1, PROGRAMMABLE INPUT 2 and PROGRAMMABLE INPUT 3 are triggered by voltage between 9V
and 15V and an intensity between 1,5mA (@9V) and 3mA (@15V). If a dry contact is used to trigger the programmable inputs,
the REF+output can be used to supply this dry contact.
PROGRAMMABLE OUTPUT 1 and PROGRAMMABLE OUTPUT 2 can be triggered either by a panel event, by a peripheral
device or by an external event such as a programmable input or a arming input.
The XTO control panel also offer a mapping feature. Mapping option allows the input to generate a video-clip via a
MotionViewer when a programmable input is triggered and/or when an event occurs.
For further information about the programmable inputs and outputs, please consult the following application notes available on our support website:
240-XV-XT - PROG INPUTS - APP NOTE
240-XV-XT - PROG OUTPUTS - APP NOTE
When user disarms the system, the
keypad indicates the last event.
In case of the user needs to read the full
log file, use the keypad to go in EVENT
LOG, press
OK or YES on SELECT LAST
EVENTS and use arrow to list the events.
4.7 Read the event log
Press OK or YES for more information about an event
EVENT
LOG
SELECT LAST
EVENTS
OK or YES
15/10/13 11:29
MODIFIED PARAMET
OK or YES
15/10/13 11:10
SYSTEM DISARMED