User Manual

2
XTO-IP Alarm panel
INSTALLATION MANUAL
Description
The XTO-iP is a fully wireless alarm system. It can be powered by standalone batteries or connected to a
power supply. This panel has been designed for outdoor installations, with its weatherproof casing and
extended operating temperature range.
With the Motion Viewers™ and Videofied
®
range of products, the XTO-iP panel provides video verification
in case of intrusion.
The XTO-iP panel has three wired programmable inputs and two wired programmable outputs. Thanks to
the Mapping feature, the programmable inputs can be configured to trigger a video.
For specific applications, the XTO-iP alarm system offers the possibility to increase its Radio and/or GPRS
performances through the connection of externally wired antennas.
Technology
The XTO-iP alarm panel, like all Videofied devices, uses the S2View® patented technology. Which is an
interactive wireless and AES encrypted technology ensuring signal integrity and optimal security.
The reliability of the signal is guaranteed thanks to the two-way radio frequency transmissions with all the
peripherals of the Videofied
®
product line.
The integrated antennas allow the system to be totally wireless, thus preventing from the system beeing
inelegant and cumbersome, and eliminating the installation problems.
The jamming detection feature identifies any intentional jamming from a third party. On the other hand, the
supervision feature consists of transmitting signals between every device of the system and the alarm panel
XTO-iP. Through the supervision, the detectors transmit every 8 minutes a presence signal.
The entire RSI VIDEO TECHNOLOGIES team wishes you a successful installation.
INTRODUCTION