User Manual

2013/01/18 Ed 1 Setup and Programming manual for XTIP series
8 | Page
1375 Willow Lake Blvd. #103
Vadnais Heights, MN 55110
E95VP Technical Specifications
Nominal Capacity
8900 mA hours
Nominal Voltage
1.5 V
Powering the Panel
**THE CONTROL PANEL MUST BE CONNECTED TO AN EXTERAL POWER SUPPLY
WHEN ETHERNET FEATURE IS ACTIVE**
Option 1: PP1
Option 2
4 x LSH20 SAFT Lithium D-Cell
Used for Standalone or Xtender m
ode without
Programmable I
nputs, Programmable Outputs,
Ethernet
, or SMS
LSH20 Specifications:
Operating Temp:
-76°F to +230°F
Storage Temp: Dry, Ventilated, 86
°F Max
4 x E95VP Alkaline D-Cell + 12v 2amp DC Class 2
power supply
(not supplied)
Used for Standalone or Xtender mode where
Prog
rammable Inputs/Mapping, Programmable
Outputs,
Ethernet connection, or SMS
will be used
E95VP Specifications:
Operating Temp: 0°F to 130°F
LSH20 Technical Specifications
Nominal Voltage
3.6 V
Open Circuit Voltage
3.67 V
Nominal Capacity
9.3 Ah
Power Supply Requirements
Output Voltage (volts)
12
Output Current (mA)
2000
Certifications
Class 2 (For UL
Compliance)
WARNINGS:
1.
DO NOT USE ALKALINE B
ATTERIES IF INSTALLING
AN XTIP BELOW 30° F
2.
DO NOT INSTALL A TRANSFORMER WHEN USING
OPTION 1 (LITHIUM BATTERIES).