Installation Instructions

ManualsBrandsRSI VIDEOTECHNOLOGIES ManualsElectronicsXTIP631

www.videofied.com

Security

With two modes of transmission, Ethernet and Cellular (3G), the

XT-IP630 panel ensures maximum safety. In case of Ethernet

connection loss, the XT-IP630 panel will switch to cellular (3g)

(if enabled) to transmit alarms and videos.

Description

The XT-IP630 control panel is a wireless, battery operated,

hybrid alarm system. It is designed for residential, small

business security applications, as well as both indoor and

outdoor commercial applications (construction sites, cell

towers, remote sites, substations...) where the location of the

panel has Ethernet (IP) or Cellular (3G) connection.

Features

The panel includes the choice of many different conﬁguration

options including the following:

> Arming by Videoﬁed Peripherals, Schedule, Virtual Keypad,

or exisiting alarm system.

> Power the system by Power Supply + Battery Backup or

standalone battery (up to 4 years).

> Communicate over Ethernet + Cellular Backup (3G),

Ethernet Only, or Cellular Only (3G).

> 25 wireless zones for Videoﬁed Peripherals plus 3

Programmable input zones for hardwired devices.

> Choose between the Internal RF antenna or switch to an

External RF antenna option.

> 2 Hardwired outputs.

> Virtual Keypad arming and disarming from Smartphone.

Supervised Wireless Technology

The XT-IP630, along with all Videoﬁed devices, utilize patented

S2View® - Spread Spectrum, AES Encrypted Wireless

technology, providing optimum signal integrity and security.

Bi-directional RF communication paths between all system

devices and the system control panel assure high signal

reliability. Integrated RF and Cellular connections allow for

addition of external antennas for increased performance.

The panel supervises every device (excluding the remote

keyfob) to validate current open/close state, tamper condition,

serial number, date of manufacture, ﬁrmware revision, and

battery status.

* When using the XT-IP630 panel with the Ethernet connection or SMS Arming you

must use a 12v 2A Power Supply with 4 Alkaline battery backup (PP4)*

PRODUCT SPECIFICATIONS SHEET

Control Panel XT-IP630

Made by RSI VIDEO TECHNOLOGIES 2327-XT-IPSP February 2013

Summary of content (4 pages)

PAGE 1
Control Panel XT-IP630 PR O D U C T S PECI FI CATI O N S S H E E T Made by RSI VIDEO TECHNOLOGIES 2327-XT-IPSP February 2013 Description Supervised Wireless Technology The XT-IP630 control panel is a wireless, battery operated, hybrid alarm system. It is designed for residential, small business security applications, as well as both indoor and outdoor commercial applications (construction sites, cell towers, remote sites, substations...
PAGE 2
Control Panel Videofied XT-IP630 Compatibility The XT-IP630 works with all the following Videofied wireless devices: Indoor MotionViewer integrated PIR motion detector, night vision digital camera, infrared illuminators. MotionViewers detect intruders and capture a 10 second video of the intrusion which is sent to the panel over RF. Interior Sirens - provide status beeps and alarm sounds throughout the premises where needed.
PAGE 3
Control Panel XT-IP630 PRODUCT SPECIFICATIO N Properties Communication Formats Power Requirements (Option 1) Must be used when using Ethernet Communication or SMS12v DC / 2A Protocols Back up 4 Alkaline 1.
PAGE 4
Control Panel XT-IP630 PRODUCT SPECIFICATIO N SHEET FCC Regulatory Information for USA and CANADA FCC Part 15.21 Changes or modifications made to this equipment not expressly approved by RSI VideoTechnologies may void the FCC authorization to operate this equipment. FCC Part 15.105 Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.