Installation Manual

2013/01/18 Ed 1 Setup and Programming manual for XTIP series

9 | P a g e

1375 Willow Lake Blvd. #103

Vadnais Heights, MN 55110

XTIP Programming

Programming Device/Keypad

Reset the XTIP Panel:

Press and hold programming button () for 10sec until the

Indicator LED blinks twice

Press and instantly release the programming button ().

The indicator LED will blink once. The panel is now in ‘Learn

Mode’ for the CMA601/XMB-XMA-WMB611 keypad.

CLR & ESC/NO

<======XX======

Insert all three batteries into the CMA/XMB/XMA/WMB and

press both the ESC/NO and CLR keys at the same time and

release.

The indicator LED on the keypad will blink rapidly.

YES/OK

KEYPAD 1

RECORDED

RSI (c)20##

www.RsiAlarm.co

<- LANGUAGE : -

ENGLISH

 or  for language selection

YES/OK to apply

Other languages are available by scrolling with arrows.

ITALIANO, NEDERLANDS, DEUTSCH, CASTELLANO,

SVENSKA, PORTUGUES, FRANCAIS

Press YES/OK for the selected one.



*Note: If you are having issues

pairing the keypad to the panel,

please refer to the troubleshooting

section.

