Installation Manual

2013/01/18 Ed 1 Setup and Programming manual for XTIP series
7 | P a g e
1375 Willow Lake Blvd. #103
Vadnais Heights, MN 55110
Obtaining XMB/XMA/WMB Keypad Special Characters
Obtaining CMA Keypad Special Characters
*The SIM card must NOT be inserted or removed while the panel is powered*
Install the SIM card
Slide SIM card into the slot.
Make sure it is aligned correctly.
The SIM card is not required if
you plan to use Ethernet only.
Connect the RJ45 (Ethernet
cable) to the panel
Plug the RJ45 cable into the
Ethernet jack on the control
panel. The cable can be routed
back through the wire channel to
make sure it does not get
pinched.
Important:
When the panel attempts a
transmission via Ethernet a
red LED will flash.