Installation Manual

2013/01/18 Ed 1 Setup and Programming manual for XTIP series
2 | P a g e
1375 Willow Lake Blvd. #103
Vadnais Heights, MN 55110
Table of Contents
Page
FCC 3
Installation Guidelines 4
Introduction 5
Initial Programming 6-16
Device Installation 17
Disabling Monitoring 18
Entering Badges and Access Codes 19-20
Choosing Siren Options 20
Ethernet Parameters and Testing 21
Testing GPRS / 3G Level and Error Codes List 22
Testing Device RF Level 23
XTIP Power Chart 24
Arming Input Wiring Diagram 25
Testing to Central Station 26
Mounting XT/XTX 27
Programmable Input Configuration 28-30
Programmable Output Configuration 31-33
Configuring Scheduling 34-36
Troubleshooting 37-39
After Initial Programming Flow Chart 40-41
Addendum 42-43