Installation Manual

2011/11/10 Ed 1.5 Setup and Programming manual for XT series GPRS
9 | P a g e
4455 White Bear Parkway, Suite 700
White Bear Lake, MN 55110
XT Programming
CMA Programming Device/Keypad
or
Reset the XT Panel:
Press and hold programming button () for 10sec until the
Indicator LED blinks twice
Press and instantly release the programming button ().
The indicator LED will blink once. The panel is now in ‘Learn
Mode’ for the CMA601 keypad.
CLR & ESC/NO
<======XX======>
Insert all three batteries into the CMA601 and press both the
ESC/NO and CLR keys at the same time and release. The
indicator LED on the keypad will blink rapidly.
YES
KEYPAD 1
RECORDED
RSI (c)2005
www.RsiAlarm.com
<- LANGUAGE : ->
ENGLISH
 or  for language selection
YES to apply
Other languages are available by scrolling with arrows.
ITALIANO, NEDERLANDS, DEUTSCH, CASTELLANO,
SVENSKA, PORTUGUES, FRANCAIS
Press YES for the selected one.


*Note: If you are having issues
pairing the keypad to the panel,
please refer to the troubleshooting
section.