Installation Manual

2011/11/10 Ed 1.5 Setup and Programming manual for XT series GPRS
7 | P a g e
4455 White Bear Parkway, Suite 700
White Bear Lake, MN 55110
*The SIM card must NOT be inserted or removed while the panel is powered*
Powering the Panel
**THE CONTROL PANEL MUST BE CONNECTED TO AN EXTERAL POWER SUPPLY
WHEN SMS FEATURE IS ACTIVE**
Option 1: PP1
Option 2
4 x LSH20 SAFT Lithium D-Cell
Used for Standalone or Xtender mode without
Programmable Inputs, Programmable Outputs, or
SMS
LSH20 Specifications:
Operating Temp: -76°F to +230°F
Storage Temp: Dry, Ventilated, 86°F Max
4 x E95VP Alkaline D-Cell + 12v 2amp DC Class 2
power supply (not supplied)
Used for Standalone or Xtender mode where
Programmable Inputs/Mapping, Programmable
Outputs, or SMS will be used
E95VP Specifications:
Operating Temp: 0°F to 130°F
E95VP Technical Specifciations
Nominal Capacity
8900 mA hours
Nominal Voltage
1.5 V
LSH20 Technical Specifications
Nominal Voltage
3.6 V
Open Circuit Voltage
3.67 V
Nominal Capacity
9.3 Ah
Power Supply Requirements
Output Voltage (volts)
12
Output Current (mA)
2000
Certifications
Class 2 (For UL
Compliance)
Install the SIM card
Slide SIM card into the slot.
Make sure it is aligned correctly.