Installation Manual

2011/11/10 Ed 1.5 Setup and Programming manual for XT series GPRS
34 | P a g e
4455 White Bear Parkway, Suite 700
White Bear Lake, MN 55110
NOTE: To ensure proper
functioning and to keep the case
water proof you must mount the
panel with the wire channel facing
down.
2. Place the cover on the base.
3. Screw the cover to the base using the provided 8 screws.
4. Place the L shaped mounting bracket onto the base using the provided bolts.
5. Place the two U shaped brackets around the pole and attach the locking bracket. Use the locking
washers and nuts to attach the U bracket to the L mount.
1. When closing the cover be sure
to line up the two BOTTOM
stickers face to face.
2. Be Careful not to slide the cover
on. Instead come straight down
in order to have the cover tamper
properly seat.