Installation Manual

2011/11/10 Ed 1.5 Setup and Programming manual for XT series GPRS
19 | P a g e
4455 White Bear Parkway, Suite 700
White Bear Lake, MN 55110
How to Disable Monitoring
Disabling monitoring can be a useful tool in many situations. Before mounting devices and moving the
panel to find a good GPRS level, disabling monitoring will ensure that you will have access to programming
and that unnecessary signals are not sent to the monitoring station. When performing maintenance on the
system disabling monitoring until the issue has been resolved will ensure that you will have access to
programming throughout your troubleshooting.
Press YES on MONITORING ENABLED and use the 
to change the value to DISABLED and press YES to lock it
in. Press and hold ESC/NO for 5 seconds to return to the
main menu.
Use the  to move to CONFIGURATION MONITOR.
STATION
Press YES on MONITORING PARAMETERS
Press the  to move to CONFIGURATION
Enter the installer code for the system
Enter the installer code for the system
Press the arrow to move to ACCESS LVL.
Use your arrow keys to change the level to 4
YES
YES
MONITORING:
DISABLED
YES
BADGE OR CODE
YES
YES
BADGE OR CODE
****
YES
CONFIGURATION
MONITOR. STATION
ACCESS LVL: 4
MONITORING
PARAMETERS
MONITORING
ENABLED
CONFIGURATION
ACCESS LEVEL
3
10/12/27 10:53
DISARMED LVL:3
GENERAL
PARAMETERS