User's Manual

00
3
Vi deofied Secu r i ty System I n sta llat i o n Man u a l
The keypad becomes inactive after 40 seconds of
inactivity, in order to make the display to reappear,
press on the [YES] key.
15
Use alkaline batteries for the panel and for the interior and
exterior sirens.
3. Installation and programming
2. The golden rules
Open the packaging box and take out the cardboard divider
which serves as a gauge. Position it level against the attachment
tting, making sure the arrow is pointing upwards. Mark the 5
points, remove the gauge and pierce the 4 attachment holes
and the auto-protection hole. Attach the base. Insert the 8
alkaline batteries in their lodgings, paying attention to the correct
alignment of the positive and negative charges.
Before removing the front side of the packaging box, insert the
SIM card (voice/data or GSM/GPRS) as illustrated in gures 1
and 2.
Assemble the front side with the base by positioning the hinges
on the base.
3.1 Initialize the panel
• Insert the power cable into the power connection (the panel
emits a beep) and the keypad lights up and ashes.
• Hold down the PROGRAM BUTTON on the panel for 10
seconds untiil the keypad beeps again and lights up all the keys
of the panel keypad.
• Briey press the PROGRAM BUTTON of the panel again to
switch to keypad registration mode.
3.2 Record the keypad (cf. Keypad installation
manual)
• Insert the 3 Lithium LS14500 batteries in the keypad.
• Do not x the keypad, it will help you in the recording and
setting of the devices.
• Simultaneously press on [CLR] and [ESC NO] buttons on
the keypad, until the keypad’s indicator ashes and then release.
3.3 Close the panel cover
• Screw in the screw on the left of the box.
16
The ITRA110/600 and DCVA200/600/700 (devices
with pet immune) should never be placed
in stairs, or near stairs. (Risk of untimely triggerings).
14
Figure 1 Figure 2
Base
Hinges
PROGRAM Button
Alkaline batteries
Power
connection
Power cable