User Manual

3
INSTALL SHEET
OMV OUTDOOR MOTION VIEWER
Mounting Recommendations
For optimal use, OMV MotionViewer mounting shall respect the following recommendations.
Mounting height :
Recommended mounting height should be comprised between 2.5m and 3m.
When you install the MotionViewer higher, the detection distance is raised. However the sensitivity is
reduced and the blind area under the MotionViewer is larger.
When you install the MotionViewer lower, the sensitivity is raised and the blind area under the detector is
reduced. However the detection distance will be reduced.
Tilt :
The detector should be tilted 3° to 5°
Raising or reducing the tilt, even slightly, has a big impact on the detection distance and on the blind area
under the MotionViewer.
Example : Increasing the tilt from 5° to 15 ° can reduce the detection distance up to 33%, that could translate
into a loss of detection distance to 4 meters
Blind Area
Max detection distance